Nedo Linus¹ HV
Description
Nedo Linus 1 HV is built from the ground up to work outside on any job site. Producing one 360 deg horizontal line and 4 vertical lines for setting out 90 degree right angles. The lines are pulsed so the Receiver can detect up to a distance of 150m and the Acceptor has a mm display for the most accurate of jobs. The plumb point down allows the user to set over a point and with the slow motion screws, aim the beam at a distance point and then all the other beams are at 90 deg. The other function of the vertical beams is for determining if a wall is vertical for slab applications. See the brochure for ALL the features of this unique laser. Made in GermanyGallery
Details
- Self-levelling universal laser for levelling, aligning, plumbing and marking off right angles
- Extremely robust
- Horizontal 360° laser line
- Four vertical, individually switchable laser lines at 90° angles, pointing down
- Plumb point
- Robust, motor-powered levelling, Self-levelling range ± 5°
- Rugged housing protected against low pressure jet water in accordance with IP 65
- Connecting thread 5/8“
- Multifunctional foot made of diecast aluminium with fine adjustment for precise axis alignment
- Laser receiver ACCEPTORLine with mm display and Heavy Duty rod clamp made of diecast aluminium
- Gardening and landscaping: – Paving – Borders – Car parks – Terraces and sun decks
- Structural and civil engineering: – Marking off right angles in terrain – Foundations – Formwork and walls
- Woodworking and carpentry: – Timber post structures – Sole plates – Carports and 1:1 elevations
- Steel construction: – Columns – Sleeve foundations – Weld-on plates – Conservatories
Specifications
| Levelling accuracy | ± 1 mm/10 m |
| Self-levelling range | ± 5° motor-powered, with automatic level control of the horizontal axis |
| Working range | up to 200m diameter with receiver ACCEPTORLine |
| Laser | Laser class 2M, 635-650 nm |
| Protection class | IP 65 |
| Power supply | Rechargeable batteries NiMH 4,8 V, 3800 mAh |
| Vertical lines’ angle of aperture | 135° |
| Operation duration | approx. 30 h |
| Connecting thread | 5/8’’ |
| Calibration | Australian Calibration Certificate provided |
| Warranty | 2 Years |